Can Crusher Overall - Baylie

These are photos of the finished project I had completed recently called the can crusher. I had learnt skills like how to MIG weld and also gas weld, I had also learnt how to use the lathe. There are a lot of things I can improve such as my welding skill because my welds looked off at some parts. I had also MIG welded the endplate because of the issues of the gas welder that someone had tampered with. Overall it was a great project and it can show off your skills really well. I had a lot of fun doing it and I would like to see myself use these skills in the future.

Written Instructions

From: Administration

To: Staff Members

CC: Office Manager

Date: 18 August 2020

Subject: Fire Evacuation Instructions

Hello everyone,

The administration team have written a new set of fire evacuation instructions that will be sent through emails and will have copies of it around the main points of the workplace. Please read all instruction carefully and take them seriously.

1. When the fire alarm goes off everyone inside the building is expected to meet at the main assembly point.

2. Make sure there is nothing blocking the emergency exits.

3. Do not enter the building until you have been told it's clear by a fire safety officer.

I hope you guys can understand these rules clearly and abide by them if there are any problems let the administration team know. These rules can also be used for your own household if needed.

Cheers,

Meg Williams

Assistant Manager

Engineering Evidence Blog - Power Tools

 Photos will be inserted here after my project.

Engineering Evidence Blog - Hand Tools

Baylie Raxworthy

132030449 

This is an entry-level unit standard for people to demonstrate a basic understanding of selecting, using and caring for the correct type of engineering hand tools. 

People credited with this unit standard are able to demonstrate knowledge of the selection of different types of hand tools; select and use engineering hand tools to meet task requirements; and care for engineering hand tools. 

Engineering hand tools applicable to this unit standard fall within the following categories:

 Cutting tools: examples – hacksaws, chisels, files, hole punches, tin snips. 

Assembly tools: examples – hammers, punches, vices, clamps, spanners, wrenches (including impact and torque), pliers.

My evidence to support my assessment booklet 

Cutting tools.

	Hack saw  In this photo I am using a 32 tpi hacksaw to cut my bar that is 410mm long 16mm wide and has a thickness of 4mm.
	Metal file  Here I am using a flat file to square my bar that is 410mm long 16mm wide and thickness of 4mm.
	Tin snips I am using tin snipes to cut sheet metal that is 110mm wide 65mm long and 1.5mm thick.

Assembly tools 

	Spanner or wrench I was tightening the nut on the mil for my work
	Hammer Here I am using a hammer and a centre punch to mark where I am going to drill an 8mm hole so I can place a bolt into it.
	Gripping tools I am using a clamp to hold my work together to wield to create a frame for my project.

What have I learnt?

I learnt how to use a range of hand tools during the year since this is my first year in engineering. I have gained a bunch of experience around tools, what they do, and how to use them.

What was the most difficult tool to use and why?

I think the file was one of the most difficult to use just because it was very time consuming and you had to try to make everything as square as possible.

What did I enjoy?

I enjoyed wielding the frame because it was satisfying watching it come together.

What would I do differently next time?

Faster production definitely so I can meet the deadline and start another project.

This supports the assessment for Hand Tools that can be found on this website https://sites.google.com/hornby.school.nz/mr-r-manufacturing/senior-manufactring/hand-tools

For more information on industry qualifications:www.competenz.org.nz/jobseekers/

Review

RE: Use of Bins

4 August 2020

To: Jenny McCabe

Hello Jenny,

I am writing this review to inform you about the behaviour of the staff and their use of the bins.

• The food bin is not empty often which leaves a bad odour and mould growth
• They think it is a waste of time putting the bins out
• They often forget what bin to place their items in

Those are the mains points of what the current situation is but other than that the system is going well.

Regards,

John Flon

Staff Member

Letter

The Department Store

335-337 The Parade

Beachtown

Auckland 1111

ph: 09 889 8899

email: thedepartmentstore@email.com.nz

web: thedepartmentstore.com.nz

Greetings Mr Jack Sampson,

RE: Bad Customer Service

My sincere apologies about the actions that our staff member had performed we will take action and let the person know they were in the fault. We will also like to give you a voucher in addition for the bad experience and we wish to see you here again.

Thanks

Rebecca Smith

Manager - Footwear

The Department Store

English Questions

1. Where does Gran Torino take place? When? - Highland Park, Detroit, Michigan. 1972 
2. What is significant about this setting? Walt took part in the Korean war and had made an effort to civilise with Koreans. Walt had also made an effort to help change the youth.
3. What do you think is Walt’s motivation for mentoring Tao? - to make him a man and not a criminal 
4. How does Walt feel about Sue compared to her brother Tao, in the beginning? Why do you think he feels this way? Walt thinks that tao is slow and sue is all right kid
5. How does Walt feel about his own family? How is this different from the way his neighbours treat the idea of family? - He finds his Kids annoying and his Grandkids Disrespectful 
6. What are some customs which Walt’s neighbours have which surprise him? - that they killed that chicken thing and touching children's heads is bad
7. Have you ever experienced “culture shock” or been surprised by a cultural practice which is different from your own? What surprised you and why? I went to Auckland and they are rude up there, those pricks
8. What is the purpose of the priest character? How would the film be different if this character was not included in the story? - to be a dick and explain walt's relationship with his wife
9. How is Walt affected by his experiences by his experience at war? - He had killed a Korean boy that had surrendered to him during the war and that affected him during the rest of his lifetime because he killed an innocent citizen
10. What do you think is the director’s view of gang culture? How do you know? He finds that violence does not solve every problem but resorts to violence to show a true understanding of life and death. He wanted to show that that being violent is not the answer, therefore, he had made it so Walt sacrifices himself to end the violence that was brought to the Hmong people.
11. Why do you think the film is called Gran Torino? What is the significance of the title? - The Gran Torino is the car that Walt owns and gives to tao when he dies.
12. What is the role of religion in this film? Christianity because Walt offers his life to lose his sins in order to suppress the violence in his neighbourhood. His wife used to take him to church and he believed it would’ve been good if he did what his wife asked.